1995 Truck Automatic transmission slipping reverse

[Guest]

garon99 [guest] from 10W40.com
1995 Truck Automatic transmission worked fine then out of no where reverse began slipping. Checked fluid, changed filter. It got worse??? Any Help Posted 6-30-2003 14:31

Any suggestions would be appreciated.
--------------------------------------------------------------------------------

papapooh from 10W40.com
tranny Posted 7-2-2003 18:15

ok first of all if you dont have sevices done regularly ur clutch packs get worn the material sticks to then and the fluid has the material in them so the tranny seems to work fine if you do a service with fluid and filter the material is gone and the new filter picks up all the left over material in the fluid in the torque converter there for the clutch packs get smooth and every gear slips i would take it to a tranny shop and have it rebuilt and dont drive it cause they charge more if hard parts are bad like palatery gears and regular gears also if you have the resources to pull the tranny your self find a shop that will charge for the rebuild and the labor on the rebuild only the cost i would estimate if you pull it would be 500 to 800 and if you dont pull it it could be 1300 to 2100 thats based on 55 to 75 an hr on labor i would definatly get it rebuilt if the truck is worth it to you
hope this helps
papapooh