How to reset dash display for 'oil change req'd'.

[BOB V]

Hello all---- I have a Lexus ES350 2008 and I need to re-set the 'oil change reqd' message in the display. I dont know how to reset this message as I've already changed the oil. Thanks in advance for your help. Bob

[way2old]

I don't know exactly, but it should tell you in the owner's manual.

[BOB V]

I looked at all 460 pages in the manual and in the warranty guide, paragraph by paragraph, and dont find how to reset it. thanks just the same.

[gacyota]

1. Start Engine. Switch display to "Trip A". Turn ignition off
2. WITH KEY OFF press and hold trip reset button. Turn ignition on but do not start vehicle. COntinue to hold trip reset button until odomoter reads 000000(about 7 seconds). Reminder light will turn off. If reset procedure did not work, Oil reminder light will continue to flash.

[BOB V]

At the risk of sounding dumb, how do you set the display to 'Trip A'. Also, this is a push button ignition, so I'm really not familiar with this fancy stuff.lol. To put the iginition on, but not start the car, I guess you mean to just press the ignition button once, without my foot on the brake? Thanks for your patience, I'm from the old school of car repair--Just change the oil and write it down with a pen and paper-lol.

[BOB V]

Thanks for all your help. I WAS able to reset the display. It was more tricky than the oil change itself-almost-lol---Thanks again, Bob