95 Pont. Transport wont start

[KBWood]

95 Pont. Transport 3.1 won't start. It has been running fine till yesterday. I was flushing the cooling loop every which way, so I had a little water under the hood in places, but nothing I hadn't done before. When I started it up to rotate the water thru to flush again, I seen a puddle of water on top of the air filter housing. This evidently is from the hard rain we've been having (not from my hosing out lines). It appears that it leaks under my windshield into the engine area maybe? Anyway, after I shut it off and soaked up the water on top of the air filter housing and drained radiator. I filled it up again, and went to start it, and it hasn't started since. After taking off the cover, I seen a little moisture in there, but can't tell if it actually had water in there big time. Did I get water down in where the injectors are? If so, what has to be done for this thing to turn over. I'm in real trouble here, as this is my work van, and I could get a call for a job anytime.

I have taken the housing off again to look at the injectors and they are spraying fuel.
I removed plug and wire and connected them back together against metal to check spark. There was spark (white, not blue).